10810 Guy R Brewer Blvd
Queens, NY 11433
(917) 293-2703
Current Inspection Grade: A
At A Glance
876 Crown has an average score of 13 from 3 scored inspections (see inspection history).
The average is under 14, which equates to having an A average. This shows that 876 Crown consistently maintains a high level of control over food safety and handling, personal hygiene, facility and equipment managment and vermin control.
An establishment typically has two chances to earn a Grade A in every inspection cycle. It needs to score below 14 points either on its initial visit, or during the re-inspection if it didn't score below 14 points on the first visit.
An establishment typically has two chances to earn a Grade A in every inspection cycle. It needs to score below 14 points either on its initial visit, or during the re-inspection if it didn't score below 14 points on the first visit.
Inspection History
08/14/2023 | Cycle Inspection / Re-inspection | Score: 12 | A
- (Critical) Hot TCS food item not held at or above 140 °F.
- Dishwashing and ware washing: Cleaning and sanitizing of tableware, including dishes, utensils, and equipment deficient.
10/19/2022 | Cycle Inspection / Initial Inspection | Score: 15 | Not Graded
- (Critical) Personal cleanliness is inadequate. Outer garment soiled with possible contaminant. Effective hair restraint not worn where required. Jewelry is worn on hands or arms. Fingernail polish worn or fingernails not kept clean and trimmed.
- (Critical) No hand washing facility in or adjacent to toilet room or within 25 feet of a food preparation, food service or ware washing area. Hand washing facility not accessible, obstructed or used for non-hand washing purposes. No hot and cold running water or water at inadequate pressure. No soap or acceptable hand-drying device.
07/22/2021 | Cycle Inspection / Initial Inspection | Score: 12 | A
- (Critical) Food contact surface not properly washed, rinsed and sanitized after each use and following any activity when contamination may have occurred.
- Proper sanitization not provided for utensil ware washing operation.
- Non-food contact surface improperly constructed. Unacceptable material used. Non-food contact surface or equipment improperly maintained and/or not properly sealed, raised, spaced or movable to allow accessibility for cleaning on all sides, above and underneath the unit.
- Accurate thermometer not provided in refrigerated or hot holding equipment.
Leave a Reply