Shabu Shabu Nayumon

115 Division Street
Manhattan, NY 10002
(917) 244-3815

Current Inspection Grade: A
Current Grade: A
Last Graded: 08/07/2019
 
 

At A Glance

Shabu Shabu Nayumon has an average score of 23 from 2 scored inspections (see inspection history). The average is between 14 and 27, which equates to having a B average. This shows that Shabu Shabu Nayumon may not be consistently maintaining a high level of control over food safety and handling, personal hygiene, facility and equipment managment and vermin control.

An establishment typically has two chances to earn a Grade A in every inspection cycle. It needs to score below 14 points either on its initial visit, or during the re-inspection if it didn't score below 14 points on the first visit.

Inspection History

12/28/2022 | Cycle Inspection / Re-inspection | Score: 27 | B
  1. (Critical) Wiping cloths not stored clean and dry, or in a sanitizing solution, between uses.
  2. (Critical) Raw, cooked or prepared food is adulterated, contaminated, cross-contaminated, or not discarded in accordance with HACCP plan.
  3. (Critical) Hot TCS food item not held at or above 140 °F.
  4. (Critical) Personal cleanliness is inadequate. Outer garment soiled with possible contaminant. Effective hair restraint not worn where required. Jewelry is worn on hands or arms. Fingernail polish worn or fingernails not kept clean and trimmed.
  5. Non-food contact surface or equipment made of unacceptable material, not kept clean, or not properly sealed, raised, spaced or movable to allow accessibility for cleaning on all sides, above and underneath the unit.
06/15/2022 | Cycle Inspection / Initial Inspection | Score: 19 | Not Graded
  1. (Critical) Food contact surface not properly washed, rinsed and sanitized after each use and following any activity when contamination may have occurred.
  2. (Critical) Food not protected from potential source of contamination during storage, preparation, transportation, display or service.
  3. (Critical) Food not cooled by an approved method whereby the internal product temperature is reduced from 140º F to 70º F or less within 2 hours, and from 70º F to 41º F or less within 4 additional hours.

Be the first to comment

Leave a Reply

Your email address will not be published.


*